In the purchase of magnetic powder clutch, magnetic powder brake, the best choice of quality assurance products, and in the boot did not do before the excitation caused by stuck, before the official operation or device to move, you must make uniform operation to the official operation, in the absence of excitation state , The drive side as high as possible (1800rpm or less) after about 1 minute turn, set the excitation current rated 1 / 4-1 / 5, on the one hand swing drive side, on the one hand 5 seconds, 10 seconds off, Intermittent exhaust about 20 times.

　Magnetic powder brake, the magnetic powder clutch in the transportation process or place for too long lead to fill in between the two sets of magnetic powder particles between the side of the overload protection, when the work system accident, torque overload, the clutch automatically slip, Protects the mechanical equipment and the motive force, the combination is frequent, the response speed is quick, the frequency is high, may reach 40-60 times per minute, may widely apply in the fast working condition and the high frequency situation, the linearity is good, the torque and the exciting current is quite widespread Is proportional to the range, can be used for linear adjustment element.